Ford BA BF XR6 Turbo and F6 Cobra Kits

///Ford BA BF XR6 Turbo and F6 Cobra Kits
Ford BA BF XR6 Turbo and F6 Cobra Kits 2018-05-23T17:03:05+00:00

Includes:

  • NizEdit and custom tune
  • Nizpro hi-flow injectors (change over)
  • Nizpro Heavy duty Cobra valve springs
  • Servicing including Mobil 1 oil
  • Genuine oil filter and full check over

Warranty: 20,000km / 12 month engine and turbocharger warranty on our Stage 1 Cobra kits.**

EPA: Compliant.

Note: MkII BF and F6 models don’t require Cobra valve springs or conrods to be fitted. They do However require a Nizpro Hi-flow cat.

Includes:

  • NizEdit and custom tune
  • Nizpro hi-flow injectors (change over)
  • Nizpro Heavy duty Cobra valve springs
  • Servicing including Mobil 1 oil
  • Genuine oil filter and full check over
  • Nizpro intercooler and piping

EPA: Compliant.

Warranty: 20,000km / 12 month engine and turbocharger warranty on our Stage 1 Cobra kits.**

Includes:

  • NizEdit and custom tune
  • Nizpro hi-flow injectors (change over)
  • Nizpro Heavy duty Cobra valve springs
  • Servicing including Mobil 1 oil
  • Genuine oil filter and full check over
  • Nizpro intercooler and piping
  • Nizpro cast alloy rocker cover garnish
  • Nizpro cast alloy intake plenum
  • Nizpro intercooler hoses
  • Nizpro Cast alloy throttle body adaptor
  • Nizpro Cast alloy thermostat housing
  • K&N air filter
  • Nizpro Fibreglass air box
  • Inlet manifold studs
  • Heat shrink
  • Oil breather hose
  • PCV hose
  • Hose clamps
  • Numerous cable ties
  • Dry Cell battery
  • Nizpro Battery box
  • Battery cable
  • Battery cable clips
  • Nizpro Large intercooler
  • Several bolts
  • Washers
  • T-pieces
  • Direct plug in loom extensions and earth clip
  • Nizpro Inlet Manifold
  • Intake Manifold and Battery tray nuts
  • Brass fittings for plenum intake pipe
  • Breather return hose and thermostat housing

Cobra’s Stage 2 kit reliably allows a BA, BF and F6 Turbo engine to develop a healthy 390 engine kilowatts along with vastly more torque. Cobra’s Stage 2 kit reliably delivers full power in almost all conditions and for extended periods of time.

Heat soak simply isn’t on the agenda, and this ensures absolutely no power loss during extended periods of enthusiastic driving. Don’t even bother trying this with any of the factory-enhanced kits! Significantly, of course depending on the vigour of your right foot, fuel consumption will not increase over the factory figures. Once again, achievements such as this typically are not available with systems that merely expand on factory theory.

Note: MkII BF and F6 models don’t require Cobra valve springs or conrods to be fitted. They do however require a Nizpro Hi-flow cat.

Includes:

  • NizEdit and custom tune
  • Nizpro hi-flow injectors (change over)
  • Nizpro Heavy duty Cobra valve springs
  • Servicing including Mobil 1 oil
  • Genuine oil filter and full check over
  • Nizpro intercooler and piping
  • Nizpro cast alloy rocker cover garnish
  • Nizpro cast alloy intake plenum
  • Nizpro intercooler hoses
  • Nizpro Cast alloy throttle body adaptor
  • Nizpro Cast alloy thermostat housing
  • K&N air filter
  • Nizpro Fibreglass air box
  • Inlet manifold studs
  • Heat shrink
  • Oil breather hose
  • PCV hose
  • Hose clamps
  • Numerous cable ties
  • Dry Cell battery
  • Nizpro Battery box
  • Battery cable
  • Battery cable clips
  • Nizpro Large intercooler
  • Several bolts
  • Washers
  • T-pieces
  • Direct plug in loom extensions and earth clip
  • Nizpro Inlet Manifold
  • Intake Manifold and Battery tray nuts
  • Brass fittings for plenum intake pipe
  • Breather return hose and thermostat housing
  • Nizpro custom exhaust
  • Nizpro fuel pump upgrade
  • Nizpro turbine housing upgrade

This Kit is designed for the MkII BF and the F6 Typhoon and Tornado.

Includes:

  • NizEdit and custom tune
  • Nizpro hi-flow injectors (change over)
  • Nizpro Heavy duty Cobra valve springs
  • Servicing including Mobil 1 oil
  • Genuine oil filter and full check over
  • Nizpro intercooler and piping
  • Nizpro cast alloy rocker cover garnish
  • Nizpro cast alloy intake plenum
  • Nizpro intercooler hoses
  • Nizpro Cast alloy throttle body adaptor
  • Nizpro Cast alloy thermostat housing
  • K&N air filter
  • Nizpro Fibreglass air box
  • Inlet manifold studs
  • Heat shrink
  • Oil breather hose
  • PCV hose
  • Hose clamps
  • Numerous cable ties
  • Dry Cell battery
  • Nizpro Battery box
  • Battery cable
  • Battery cable clips
  • Nizpro Large intercooler
  • Several bolts
  • Washers
  • T-pieces
  • Direct plug in loom extensions and earth clip
  • Nizpro Inlet Manifold
  • Intake Manifold and Battery tray nuts
  • Brass fittings for plenum intake pipe
  • Breather return hose and thermostat housing
  • Nizpro custom exhaust
  • Nizpro fuel pump upgrade
  • Nizpro turbine housing upgrade
  • Engine stripped and inspected
  • All clearances are machined to exacting standards (blueprinted)
  • Crank, rods, pistons are balanced
  • Nizpro designed forged pistons
  • Cylinder combustion chamber is modified
  • Is fitted with new rings and bearings
  • Custom heavy-duty valve springs are fitted
  • Custom Nizpro steel billet oil pump gears
  • Nizpro designed custom high performance connecting rods and ARP bolts
  • Engine is reassembled to exacting standards
  • Engine and Stage 2 kit are fitted to vehicle
  • Block sonically tested to ensure no core shift or other problems
  • Engine tuned using Flash Tuner with boost at approx. 1.2 Bar
  • Engine is carefully run-in on chassis dyno; the process includes all fuel and an oil change
  • The cylinder head is stripped, checked and cleaned up where necessary, noting that in stock trim the XR6 head provides extremely good flow characteristics

Turning up the wick to Cobra’s Stage 3 Power Upgrade kit and things are starting to get very serious. As previously explained, whereas some aftermarket tuners suggest that the quality of the 4.0-litre engine’s internals are capable of withstanding much higher than stock torque loads, we do not believe that in the long term the connecting rods will provide good service.

Call it overkill, however at Nizpro we are more interested in ensuring our customers receive a product that we have absolutely no reservations in supplying. Granted, some engines may handle 450 plus flywheel kilowatts, however the question remains for how long. If an engine breaks, the damage will be significant. The alternative is to provide prevention rather than hoping for a cure once it is too late.

This package is quieter and smoother than any other BA/BF aftermarket forged piston engine on the market.

The performance of a Cobra Stage 3 kitted vehicle is simply astonishing in that it offers ‘normal’ drivability. In fact you wouldn’t know that it was anything other than stock in the way it drove, until of course you nail the accelerator. Furthermore, you are able to maintain (depending on how one drives) stock fuel consumption figures and impeccable driving manners.

Includes:

  • NizEdit and custom tune
  • Nizpro hi-flow injectors (change over)
  • Nizpro Heavy duty Cobra valve springs
  • Servicing including Mobil 1 oil
  • Genuine oil filter and full check over
  • Nizpro intercooler and piping
  • Nizpro cast alloy rocker cover garnish
  • Nizpro cast alloy intake plenum
  • Nizpro intercooler hoses
  • Nizpro Cast alloy throttle body adaptor
  • Nizpro Cast alloy thermostat housing
  • K&N air filter
  • Nizpro Fibreglass air box
  • Inlet manifold studs
  • Heat shrink
  • Oil breather hose
  • PCV hose
  • Hose clamps
  • Numerous cable ties
  • Dry Cell battery
  • Nizpro Battery box
  • Battery cable
  • Battery cable clips
  • Nizpro Large intercooler
  • Several bolts
  • Washers
  • T-pieces
  • Direct plug in loom extensions and earth clip
  • Nizpro Inlet Manifold
  • Intake Manifold and Battery tray nuts
  • Brass fittings for plenum intake pipe
  • Breather return hose and thermostat housing
  • Nizpro custom exhaust
  • Nizpro fuel pump upgrade
  • Nizpro turbine housing upgrade
  • Engine stripped and inspected
  • All clearances are machined to exacting standards (blueprinted)
  • Crank, rods, pistons are balanced
  • Nizpro designed forged pistons
  • Cylinder combustion chamber is modified
  • Is fitted with new rings and bearings
  • Custom heavy-duty valve springs are fitted
  • Custom Nizpro steel billet oil pump gears
  • Nizpro designed custom high performance connecting rods and ARP bolts
  • Engine is reassembled to exacting standards
  • Engine and Stage 2 kit are fitted to vehicle
  • Block sonically tested to ensure no core shift or other problems
  • Engine tuned using Flash Tuner with boost at approx. 1.2 Bar
  • Engine is carefully run-in on chassis dyno; the process includes all fuel and an oil change
  • Nizpro custom 1000 or 1200hp turbocharger
  • Nizpro custom stainless steel tuned length extractors
  • Nizpro custom Stage 4 intercooler plumbing
  • Nizpro turbo heat shielding
  • Stainless steel braided oil and water feed and return lines
  • 60mm external waste gate
  • New turbo side engine mount
  • Alloy water over flow tank
  • 89mm dump pipe with 50mm waste gate pipe

Want more information, give us a call today!

Contact Us
Contact Us
 
*Power levels may vary between certain vehicles due to condition of factory parts outside the control of Nizpro’s Cobra Kits, etc.
**Guarantee is valid for cars with 50,000kms or less.