|
Australia's Fastest FG XR6T & FG F310 Ute
Australia's fastest FG XR6T and FG F310 Ute quarter
mile records are now held by fully emissions
compliant Nizpro performance kitted cars.
Fitted with a Nizpro Stage 2 “plus” kit, our
customers FG XR6T has now smashed its already held
Aussie record and recorded a 11.005 second quarter
at 126.13 mph trap speed. All while using the
standard XR6T FG turbocharger and Nizpro S2 Plus
bolt on performance package.
On the same night our full weight FG FPV F310 Ute
also became Australia's fastest. Fitted with the
Orsom Nizpro stage 3 Plus package, it stormed
through the standing 400 in 10.85 seconds at 132.31
mph. Once again this car is 100% street legal and is
the very car that passed the stringent Euro 4
emissions test.
Read the hole story in the up coming Nizpro
newsletter, out soon.
------------------
New PB - 9.4 @152mph
A customer running our Nizpro
Stage 4 turbo kit, intercooler system and custom
tune has run a personal best of 9.4 at 152 mph,
bettering his previous time of 9.70 at 145 mph.
------------------
Nizpro Stage 4 BA runs 9.70
@145mph
This project has been on the go for a couple of
years, but finally hit the track last weekend.
We have only been involved over the last couple of
months and supplied the stage 4 turbo kit,
intercooler system wiring and have done all the tune
work.
The car runs a 9 inch diff and two speed power glide
and really is a bit ordinary in regards to set up
with the diff ratio and torque converter but we had
to get a base line sooner or later.
It ran 5 passes with a best of 9.7 at 145 mph, so I
guess not so bad first time off trailer.
------------------ |
 |
NSW & Sth East QLD Dealers Wanted
Nizpro has had a long association with Tunehouse in
NSW, during this time Tunehouse was a Nizpro's
dealer and an NPIA member for the NSW region.
Recently Nizpro decided to terminate our agreement
with them.
What this mean for you. Well currently, Nizpro will
be looking for workshops in the NSW & QLD area to
come on board with the opportunity to supply and fit
Nizpro product along with offering custom service.
While we are putting this together, NSW customers
and workshops can now be supplied directly from
Nizpro’s head office in Melbourne and will have the
advantage of better pricing and sale specials.
To enquire about becoming a dealer of Nizpro
products, please ring Simon or Dave on 03 9761 1522.
------------------
Service Booking Online
Book Online for
your next service! Simply fill in your details in
the form provided and hit the "Submit Booking"
button.
>>
------------------
New Nizpro
Intercooler
The new 'cooler had a
number of design parameters we needed to meet due to
the increasing power levels that are now being
achieved in our own Cobra kits.
>>
------------------
Custom BA-BF-FG Exhaust
We would like to update
you on our brand new high performance system
currently under development for the XR6 Turbo. It is
made from 102mm Stainless and is a 4" system.
>>
------------------
FG F6 runs 10.75 at 130mph
We did a stage
two kit on a customer's FG F6 recently and the owner
took it to Calder to see what it would run.
On the 1st run the car achieved 11.33 at 131mph, 2nd
run 11.03 at 131mph and the third run was a 10.97 at
130 mph! A fourth run produced a 10.90 at 130mph
with a 60ft of 1.79secs. A fifth run produced a best
of 10.75 at 130 mph with a 60ft of 1.62 seconds.
Well done to Dave the owner and a new Aus record for
the fastest FG and Fastest FG F6.
For those that don't know what a stage Two Nizpro FG
power upgrade comes with here is the list.
•
Nizpro FG intercooler kit
•
Nizpro FG 102 mm exhaust system
•
Nizpro Hi flow fuel injectors
•
Nizpro custom tune
•
Nizpro Turbine housing mods and waste gate actuator
------------------
|
